INNOVATIVE PRODUCTS AND ENGINEERING
CUSTOM MADE PARTS FOR YOUR GMC
Dave Lenzi
2285 Montague Road
Davison, MI. 48423
(810) 653-3902
All New Adjustable Drag Link with Moog tie rod ends and a machined sleeve
$176 plus shipping and your old link in return.
Adjustable Drag Link make from your existing link. A one-inch section is removed from the center of your link, right and left hand threads are lathe cut, and a new Moog adjusting sleeve is installed.
$88.00 plus shipping.
Embossed copper exhausts manifold gaskets for 403 and 455 Olds engines. Made from .043-inch thick copper and die formed.
$61.00/set plus shipping.
Re-built Idler Arm made from your existing arm. The rubber bushing is removed from the cross member pivot end. This end is machined and fitted with an Ampco bronze bushing, hardened sleeve, thrust washers, and a grease fitting. The ball stud end is cut apart; a new urethane bushing is installed. A new threaded cap with thrust washer and grease fitting is installed.
$200.00 plus shipping.
Top____________________________________________________________________________
Re-Built Relay Lever made from your existing lever. Spool O.D. is ground, a new Ampco bronze bushing is installed at the pivot point. The tapered stud is ground and a Ampco bronze bushing is installed with grease fitting.
$290.00 plus shipping.
Adjustable links for your height control valves to replace your worn out fixed length originals. Adjust ride height with the turn of a screw. Eliminates backlash and guesswork of adjusting the levers.
$61.00 plus shipping.
Re-built Height Control Valves. Cost depends on the condition of your valve. Average cost:
$66.00 each/exchange plus shipping
Steering Stabilizer consisting of a heavy-duty shock absorber, centering spring, frame-mounting bracket with micro adjustment for centering, and an intermediate rod-mounting bracket, which bolts through existing holes.
$460.00 plus shipping
Air Manifolds with Schrader valves, ball valves, S.S. gauge and fittings.
$120.00/set plus shipping
Remanufactured Knuckle. Metal sprayed with S.S. and finish ground.
$210.00 each/exchange plus shipping
Remanufactured Hub. Metal sprayed with S.S. and finish ground.
$210.00 each/exchange plus shipping
Steering Shaft
New Spicer steering shaft With lower universal joint.
$290.00 each
Steering Shaft Boots
Two boots for steering shaft. One for CV joint and one for slip joint.
$26.00/pair
